校際選修

115-1 選課時程

進行中

  • 初選第一階段 6/15/2026
  • 初選第二階段 6/22/2026
  • 校際選修 8/24/2026
  • 初選第三階段 8/31/2026
  • 開學後加退選 9/7/2026
  • 逾期加退選 9/21/2026
選課資源

能源系統設計與應用

Energy System Design and Application

學期
110-1
學分
3 學分
當期課號
5983
永久課號
IPT5116
開課單位
光電科技碩士在職專班
授課教師
楊秉純
校區
歸仁
類別
選修
上課時間表
週二
A
18:30–19:20
能源系統設計與應用
CM217
3 節連堂
B
19:30–20:20
C
20:30–21:20

* 根據陽明交大上課時間表所列

概述

能源系統設計與應用(Energy System Design and Application)之課程目標為使修課學生利用過去有關能源相關知識進行能源系統之設計來投入應用系統之分析;因此課程將從能源基本概念談起,然後從能源平衡角度來看能源系統的特性及要求;接下來則從需求端來針對國內能源耗用大宗建築、空調、照明等三大能源使用系統進行探討;最後則從管理角度結合台灣電力結構來看源管理系統、智慧電網之發展,並在最小碳排放量下達成較佳之使用模式;因此使學生能具備各種不同能源特性之了解及能源系統之考量因素和重點,並進而能完成能源系統之初步設計及分析。同時將搭配能源系統之實際設計來分析。 The aim of the course “Energy System Design and Application” is based on the existed energy knowledge of student to focus on the energy system design and application. The course will begin with the concept of energy technology, then we will discuss the characteristics and requirement of energy system from the energy balance. Following, the building, air-conditioning, and lighting system will be introduced. Then, we will talk about the development and application of energy management system and smart grid system. Finally, the discussion of different energy supply source and modes of the energy consumption will proceed to carry out the calculation of energy balance of the energy system and reach the requirement of minimum carbon emission. Students can learn the characteristics of different energy source and understand the key factors for different energy application system. Then the preliminary design and analysis can be carried out at the end of this course.

先修科目

N/A

教學方式

1) 依課程大綱及參考書資料為主。 2) 適時引述與授課相關之能源科技及產業新聞,先進技術發展,以提高學生學習興趣,並引導學生將課堂知識與日常生活連結 3) 指定課程內容相關作業,期學生提出新穎製程及設備技術的構想,以培養學生創新能力與知識能力之整合運用 1) Based on the Syllabus and reference. 2) Quote new development of energy technology and industry news to increase students' interest in learning and guide students to connect green energy technology or usage with daily life 3) Assigned homework to encourage their thinking about the concept of new manufacture process or equipment. I also expect students can cultivate their innovation ability and knowledge for the system integration technology.

評分方式

1) 作業 (2次):10×2 = 20 2) 期中報告:40 (書面20、口頭20) 3) 期末專題報告:40 (書面20、口頭20) 1) Homework (2 times):10×2=20 2) Midterm Report and Presentation :40 (Report 20, Presentation 20) 3) Report and Presentation :40 (Report 20, Presentation 20)

週次計畫
週次主題
第 1 週課程介紹 Course Introduction
第 2 週台灣能源通識 Energy situation in Taiwan
第 3 週能源特性及轉換 Characteristics Energy Source and Conversion
第 4 週能源應用系統設計概念 Concept for the Design of Energy Application System
第 5 週能源應用系統節能設計-建築 Energy Application System-Building
第 6 週能源應用系統節能設計-空調 -1 Energy Application System-Air-Conditioning -1
第 7 週能源應用系統節能設計-空調 -2 Energy Application System-Air-Conditioning -2
第 8 週期中考 Midterm Exam
第 9 週能源應用系統節能設計-照明 Energy Application System-Lighting
第 10 週能源管理系統設計概念 Concept for the Design of Energy Management System
第 11 週台灣電力結構組成及分析-Analysis of Power Infrastructure of Taiwan
第 12 週電網系統基本設計 Fundamental Design for the Grid System
第 13 週風力發電系統 Wind Power System
第 14 週太陽能系統 Solar Energy system
第 15 週緩衝時間 Reserved Time
第 16 週期末考 Final Exam
第 17 週彈性教學時間 Flexible supplementary time
第 18 週彈性教學時間 Flexible supplementary time
教科書

(For Reference Only) 1. Heat Transfer – A Basic Approach by M. Necati Ozisik 2. Heating, Ventilating, and Air Conditioning – Analysis and Design by Faye C. McQuiston and Jerald D. Parker 3. 2019年版綠建築評估手冊 by 內政部建築研究所 4. 其它可能相關的論文或資料Imprint: Woodhead Publishing, Published Date: 25th October 2016

Office Hours
地點
CM-526
時間
Tuesday 13:00 ~ 17:00
聯絡方式
bcyang@nycu.edu.tw 06-3032121 ext. 57827