積層製造系統
Additive Manufacturing Systems
學期
110-2
學分
3
學分
當期課號
5311
永久課號
IAP5159
開課單位
工學院碩士在職專班-精密組
授課教師
鄭中緯
類別
選修
上課時間表
| 節 | 週六 |
|---|---|
2 09:00–09:50 | 積層製造系統 EE527A 3 節連堂 |
3 10:10–11:00 | |
4 11:10–12:00 |
* 根據陽明交大上課時間表所列
概述
The fundamentals of each 3D printing (additive manufacturing, AM) technology are dealt with in terms of the basic process, so that the student can appreciate what is needed in order to understand, develop, and optimize each technology. Provide an opinion for why AM is so important to many branches of industry. Design and fabricated several AM parts by exercise and project.
評分方式
Homework 30% Midterm Exam 30% Final Project 30% Attendance, Participation 10%
週次計畫
| 週次 | 主題 |
|---|---|
| 第 1 週 | Introduction |
| 第 2 週 | Basic overview of AM processes |
| 第 3 週 | Software Issues for Additive Manufacturing, Lab Part 1 |
| 第 4 週 | Design for Additive Manufacturing |
| 第 5 週 | Extrusion-Based Systems, Lab Part 2 |
| 第 6 週 | Fundamentals of Laser Energy Absorption |
| 第 7 週 | Lasers and Optical Delivery Systems |
| 第 8 週 | Vat Photo-Polymerization Processes |
| 第 9 週 | Midterm exam |
| 第 10 週 | Midterm Exam |
| 第 11 週 | Powder Bed Fusion Processes |
| 第 12 週 | Powder Bed Fusion Processes , Lab Part 4 |
| 第 13 週 | Final report proposal (論文與專利研讀) |
| 第 14 週 | LPBF / SLM 論文進程研究、專利研究 |
| 第 15 週 | Beam Deposition Processes |
| 第 16 週 | Prepare the final report |
| 第 17 週 | Final Report and Presentation |
| 第 18 週 | Final Report and Presentation |
教科書
3D列印:積層製造技術與應用, 全華圖書 Additive manufacturing technologies :rapid prototyping to direct digital manufacturing by Gilbson Ian et al.
Office Hours
- 地點
- EE, 461
- 時間
- Wed. EF
- 聯絡方式
- weicheng@nctu.edu.tw #55126